Pioneerpos AT Commands G24-LC Manuel d'utilisateur

Technical InformationMotorola G24-L and G24-LC Developer’s GuideAT Commands Reference ManualAPRIL 15, 20086802983C95-C

Table of Contentsvi G24-L AT Commands Reference Manual April 15, 2008Modem Configuration and Profile . . . . . . . . . . . . . . . . . . . . . . . .

Call Control3-36 G24-L AT Commands Reference Manual April 15, 2008The only +CBST parameter that needs mapping for mobile terminated calls is <spee

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-37ExampleAT+MDC=?+MDC: (0-1)OKAT+MDC=1OKATD<number>;OKCONN

Call Control3-38 G24-L AT Commands Reference Manual April 15, 2008+MVC, Motorola Vocoders ConfigurationThis AT command is used to choose and configur

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-39Call Status Messages+CPAS, Phone Activity Status This command

Call Control3-40 G24-L AT Commands Reference Manual April 15, 2008+CLCC, List Current CallsThis command displays a list of all current G24-L calls an

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-41The following table shows the +CLCC parameters.Note: When a mo

Call Control3-42 G24-L AT Commands Reference Manual April 15, 2008+CLCC: 0OKAT+CLCC=1 //Example with unsolicited indicationOKATD055490698;OK+CLCC: 1,

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-43+MCST ParametersThe following table shows the +MCST parameters

Call Control3-44 G24-L AT Commands Reference Manual April 15, 2008Call Advice of Charge CommandsThis set of commands enables GSM operators to offer A

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-45ExampleExample with prepaid SIM card with 56700.00L prepaid be

Table of ContentsApril 15, 2008 G24-L AT Commands Reference Manual viiSTK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Call Control3-46 G24-L AT Commands Reference Manual April 15, 2008+CACM, Accumulated Call MeterThis command resets the Advice of Charge accumulated c

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-47+CAMM, Accumulated Call Meter MaximumThis command sets the Adv

Call Control3-48 G24-L AT Commands Reference Manual April 15, 2008+CPUC, Price per Unit and Currency TableThis command sets the parameters of the Adv

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-49Note: If <ppu> contains a dot, a maximum of three digits

Call Control3-50 G24-L AT Commands Reference Manual April 15, 2008Supplementary ServicesThis set of commands enables control over supplementary servi

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-51The following table shows the +CSSN parameters. Table 3-26: +C

Call Control3-52 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CSSN=? // test command+CSSN: (0-1),(0-1)OKAT+CSSN=0,0 // disable both opt

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-53+CUSD, Unstructured Supplementary Service DataThis command all

Call Control3-54 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CUSD=?+CUSD: (0,1,2)OKAT+CUSD=1,"*#100#"OK+CUSD: 2,26 //Respons

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-55NETWORK_BUSY 28NOT_SUBSCRIBED 29SERVICE_UNAVAILABLE 31SERVICE_

Table of Contentsviii G24-L AT Commands Reference Manual April 15, 2008Voice Call Manipulations . . . . . . . . . . . . . . . . . . . . . . . . . . .

Call Control3-56 G24-L AT Commands Reference Manual April 15, 2008+COLP, Connected Line Identification PresentationThis command relates to the GSM su

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-57The following table shows the +COLP parameters.ExampleAT+COLP=

Call Control3-58 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +MTTY parameters.Notes:VCO: Voice Carry Over is inte

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-59Figure 3-1 shows the TTY hardware configuration.Figure 3-1: TT

Phone Books and Clock3-60 G24-L AT Commands Reference Manual April 15, 2008Phone Books and ClockDirectory Access CommandsThis set of commands enables

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-61The following table shows the +CPBS parameters.ExampleAT+CPBS=

Phone Books and Clock3-62 G24-L AT Commands Reference Manual April 15, 2008requested, all entries that contain data within that range are returned. I

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-63ExampleAt+cpbs="ME" OKAt+cpbr=?+CPBR: (1-100,40,24)O

Phone Books and Clock3-64 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CPBF parameters.ExampleAT+CPBS="MT&quo

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-65field already exists in the PB, the new record will update the

April 15, 2008 G24-L AT Commands Reference Manual ix1-1 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Phone Books and Clock3-66 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CBPS="MT"OKAT+CPBW=?+CPBW: (1-750),40,(129,145),16OKAT

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-67The following table shows the +CSVM parameters.Note: If <mo

Phone Books and Clock3-68 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +MDSI parameters.Command Type Syntax Respons

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-69ExampleAT+MDSI?+MDSI: 0OKAT+MDSI=?+MDSI: (000,001)OKAT+MDSI=1O

Phone Books and Clock3-70 G24-L AT Commands Reference Manual April 15, 2008• <mode> = 0 - Do not show any number on next +CPIN insertion comman

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-71The following table shows the +MCSN parameters.ExampleAT+CNUM

Phone Books and Clock3-72 G24-L AT Commands Reference Manual April 15, 2008+CNUM: "PIN2","8523",129+CNUM: "","&quo

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-73System Date and Time Access Commands+CCLK, Read/Set System Dat

Phone Books and Clock3-74 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CCLK parameters.ExampleAT+CCLK=?+CCLK: &quo

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-75SMSSMS CommandsG24-L supports SMS PDU and SMS TEXT mode accord

List of Figuresx G24-L AT Commands Reference Manual April 15, 20084-22 Launch Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SMS3-76 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CSMS=128 +CSMS: 001,001,001OKAT+CSMS? +CSMS: 128,001,001,001OKAT+CSMS=?+CSMS: (128

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-77The following table shows the +CPMS parameters.+CMGF, Message

SMS3-78 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CMGF=1OKAT+CMGF?+CMGF: 1OKAT+CMGF=?+CMGF: (0,1)OK+CSCA, Service Center Address Thi

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-79The following table shows the +CSCA parameters.ExampleAT+CSCA=

SMS3-80 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CSMP parameters.ReadAT+CSMP? +CSMP: <fo>,<vp>,<

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-81ExampleAT+CSMP?+CSMP: 17,167,0,0 (default values for SMS-SUBM

SMS3-82 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CSDH parameters.ExampleAT+CSDH=?+CSDH:(0,1)OKAT+CSDH?+CSDH: 0

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-83The following table shows the +CNMI parameters.ExampleAT+CNMI=

SMS3-84 G24-L AT Commands Reference Manual April 15, 2008+CMT: "+972544565034",,"04/11/04,09:48:36+08",145,4,0,0,"+972541200

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-85If the command is executed but no acknowledgment is expected,

April 15, 2008 G24-L AT Commands Reference Manual xi1-1 AT Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SMS3-86 G24-L AT Commands Reference Manual April 15, 2008+CMTI, Unsolicited Response (New SMS-DELIVER Receipt Indication) The +CMTI unsolicited respo

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-87The following table shows the +CMT parameters.After sending a

SMS3-88 G24-L AT Commands Reference Manual April 15, 2008+CDSI, Unsolicited Response (New SMS-STATUS-REPORT Indication)The +CDSI unsolicited response

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-89In PDU mode: (+CMGF=0):+CDS: <length><CR><LF>

SMS3-90 G24-L AT Commands Reference Manual April 15, 2008message is "RECEIVED UNREAD", execution of the +CMGL command changes the status of

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-91The +MMGL command does not change the message status. In addit

SMS3-92 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CGML/+MMGL parameters.Table 3-54: +CGML/+MMGL Parameters<P

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-93ExampleAT+CMGL=?+CMGL: ("REC UNREAD","REC READ&

SMS3-94 G24-L AT Commands Reference Manual April 15, 2008+CMGR, +MMGR, Read MessageThese commands handle the reading of SMs. The command displays the

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-95The following table shows the +CMGR/MMGR parameters. Tabl

List of Tablesxii G24-L AT Commands Reference Manual April 15, 20083-45 +CSCA Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SMS3-96 G24-L AT Commands Reference Manual April 15, 2008Note: Any unused bits will be set to zero and will be ignored by the receiving entity.<pa

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-97 Table 3-57: <fo> for SMS-DELIVER MessageBit/s Referenc

SMS3-98 G24-L AT Commands Reference Manual April 15, 2008<TP-RA> Mandatory:Recipient address formatted according to the formatting rules of ad

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-99Note: Reserved bits are ignored.Table 3-59: <fo> for SMS

SMS3-100 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CPMS?+CPMS: "ME",5,59,"ME",5,59,"SM",5,20OKAT+CMGR=

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-101+MMAR, Motorola Mark As Read This command handles changing th

SMS3-102 G24-L AT Commands Reference Manual April 15, 2008Otherwise the message is sent to the DA it was stored with (if any was entered). If no DA i

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-103+CMGW, Write Message to Memory This command is used to write

SMS3-104 G24-L AT Commands Reference Manual April 15, 2008Table 3-64: Layout of SMS-SUBMIT in PDU Mode: (according to GSM03.40)Reference Description

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-105<TP-CDL> Command data length 1 BYTE<TP-CD> Comman

List of TablesApril 15, 2008 G24-L AT Commands Reference Manual xiii3-99 +MPCMC Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SMS3-106 G24-L AT Commands Reference Manual April 15, 2008Note: Any unused bits will be set to 0.ExampleAT+CMGF=1OKAT+CMGW="5124335432">

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-10700410042004300440045OKAT+CSMP=25,"05/03/15,21:22:23+08&q

SMS3-108 G24-L AT Commands Reference Manual April 15, 2008+CMGD, Delete Message This command handles deletion of a single message from memory locatio

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-109+CGSMS, Select Service for MO SMS MessagesThis command handle

SMS3-110 G24-L AT Commands Reference Manual April 15, 2008+CMGS, Send SM to NetworkThis command sends an SM from the G24-L to the network. The messag

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-111If after aborting AT+CMGS command execution and before result

SMS3-112 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+MCSAT=?+MCSAT:(0-2)OKAT+MCSAT?+MCSAT: 1OKAT+MCSAT=2OKAT+MCSAT=1,00001000 //

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-113DCS handlingSending or Storing SMWhen sending or storing SM i

SMS3-114 G24-L AT Commands Reference Manual April 15, 2008According to the GSM 03.38, Any reserved codings shall be assumed to be the GSM default alp

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-115AT+CMGW="0544565803"> 050003090301123456786543FE

List of Tablesxiv G24-L AT Commands Reference Manual April 15, 20083-153 +CGDCONT Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SMS3-116 G24-L AT Commands Reference Manual April 15, 2008OKAT+CSCS="ASCII"OKAT+CMGR=227+CMGR: "STO UNSENT","0544565803"

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-117NetworkNetwork Commands+CSQ, Signal Strength This command dis

Network3-118 G24-L AT Commands Reference Manual April 15, 2008+CRLP, Radio Link ProtocolThis command displays the Radio Link Protocol parameters that

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-119+CREG, Network Registration StatusThe following table shows t

Network3-120 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CREG=? +CREG: (000 - 002)OK AT+CREG? +CREG: 000,001 OK AT+CREG=2 OKAT+CREG?+C

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-121+CGREG, GPRS Network Registration The following table shows t

Network3-122 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CGREG=?+CGREG: (000-002)OKAT+CGREG=2OKAT+CGREG?+CGREG: 002,001,2648,988bOKAT+

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-123Command TypeSyntax Response/Action RemarksSetAT+COPS=[<mod

Network3-124 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +COPS parameters.Table 3-78: +COPS Parameters<Paramete

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-125+CPOL, Preferred OperatorsThis command is used to edit the li

List of TablesApril 15, 2008 G24-L AT Commands Reference Manual xv3-206 +MIPCONF Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Network3-126 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CPOL parameters.Note: To delete an entry from the list,

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-127This command is a non-basic command, which means that the G24

Network3-128 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +MFS parameters. ExampleAT+MFS=? //Test command+MFS: (0-

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-129Hardware InformationHardware Information Commands+CBC, Batter

Hardware Information3-130 G24-L AT Commands Reference Manual April 15, 2008OK+MBC, Battery ChargerThis command allows the battery charger to be manag

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-131The following table shows the +MBC parameters.The following t

Hardware Information3-132 G24-L AT Commands Reference Manual April 15, 2008+CBAUD, Baud Rate RegulationThis command sets the baud rate. The baud rate

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-133AT+CBAUD?+CBAUD: 57600OKAT+CBAUD=?+CBAUD: (0-13,300,600,1200,

Hardware Information3-134 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +IPR parameters.ExampleAT+IPR=6OKAT+IPR?+IPR

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-135The following table shows the +MTDTR parameters.ExampleAT+MTD

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICENoticeWhile reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. a

List of Tablesxvi G24-L AT Commands Reference Manual April 15, 2008

Hardware Information3-136 G24-L AT Commands Reference Manual April 15, 2008condition. The RTS line complements the CTS line. The G24-L puts the CTS l

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-137When AT&C is set to 0, the DCD signal is always ON. When

Hardware Information3-138 G24-L AT Commands Reference Manual April 15, 2008&D, Circuit 108 BehaviorThis command determines how the G24-L responds

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-139+MCWAKE, GPRS CoverageThis command tells the G24-L whether to

Hardware Information3-140 G24-L AT Commands Reference Manual April 15, 2008+MGGIND, GSM/GPRS Service IndicatorThis command configures the service ind

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-141+CFUN, Shut Down Phone FunctionalityThis command shuts down t

Hardware Information3-142 G24-L AT Commands Reference Manual April 15, 2008+ICF, DTE-DCE Character FramingThis command determines the local serial po

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-143ATS97, Antenna DiagnosticThis command indicates whether an an

Hardware Information3-144 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+MRSTOK// Result - G24-L module performs a power down+MIOC, Motor

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-145The following table shows the +MIOC parameters.ExampleAT+MIOC

April 15, 2008 G24-L AT Commands Reference Manual xviiPrefaceNote: All references to G24-L also apply to G24-LC, except where otherwise noted.Manual S

Hardware Information3-146 G24-L AT Commands Reference Manual April 15, 2008Data sending (vector example):Client has a data bus with 8 bits and plans

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-147+MIOD, Motorola I/O DefineThis command defines the G24-L 8 GP

Hardware Information3-148 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +MIOD parameters.The following table shows t

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-149Example+MIOD: (00000000-11111111),(0,1),( 00000000-11111111)A

Hardware Information3-150 G24-L AT Commands Reference Manual April 15, 2008ReadAT+MMAD? List of converters and their monitoring setup values.+MMAD: &

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-151The following table shows the +MMAD parameters.Unsolicited Me

Hardware Information3-152 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+MMAD =1 // Read A2D1 values with analog input of 1.75V.+MMAD:1,1

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-153+MMAD:1,160//Operation not allowed because the parameters are

Hardware Information3-154 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +MPCMC parameters.ExampleAT+MPCMC=?+MPCMC:(0

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-155AudioScopeThe audio control can be summarized to the followin

Applicable Documentsxviii G24-L AT Commands Reference Manual April 15, 2008Applicable Documents• G24-L Module Hardware Description – 6802984C05• G24-

Audio3-156 G24-L AT Commands Reference Manual April 15, 2008Table 3-100 shows the differences between Basic and Advanced audio modes in controlling t

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-157Audio Control of Path, Gain and Algorithms is available by th

Audio3-158 G24-L AT Commands Reference Manual April 15, 2008The default state is analog.Figure 3-5: Analog/Digital SwitchingGeneral Audio CommandsThe

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-159The following table shows the +CRSL parameters.ExampleAT+CRSL

Audio3-160 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CLVL parameters.ExampleAT+CLVL?+CLVL: 7OKAT+CLVL=?+CLVL: (

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-161ExampleAT+CMUT=?+CMUT:(0-1)OKAT+CMUT?+CMUT: 0 uplink voice i

Audio3-162 G24-L AT Commands Reference Manual April 15, 2008The following table shows the S94 parameters.ExampleATS94=0 //Disable sidetoneOKATS94=2+C

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-163The following table shows the S96 parameters.ExampleATS96=1 /

Audio3-164 G24-L AT Commands Reference Manual April 15, 2008The following diagram shows the audio paths:.Figure 3-6: Audio PathsCommand TypeSyntax Re

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-165The following table shows the +MAPATH parameters.ExampleAT+MA

Preface April 15, 2008 G24-L AT Commands Reference Manual xixManual Banner DefinitionsA banner text in the page footer under the book title (for exam

Audio3-166 G24-L AT Commands Reference Manual April 15, 2008+MAVOL, Volume Setting This command enables you to determine a volume level for a particu

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-167The following table shows the +MAVOL parameters.Example//Set

Audio3-168 G24-L AT Commands Reference Manual April 15, 2008+MAMUT, Input Devices Mute This command controls the muting/unmuting of all input paths (

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-169+MAFEAT, Features SelectionThis command controls the algorith

Audio3-170 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+MAFEAT=5,1 //Enables sidetone and noise suppressOKAT+MAFEAT?+MAFEAT: 1,1 //Feat

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-171OKAT+MADIGITAL=0 OKAT+MADIGITAL? +MADIGITAL: 0OKAT+MADIGITAL=

Audio3-172 G24-L AT Commands Reference Manual April 15, 2008+ MMICG, Microphone Gain ValueThis command handles the selection of microphone gain value

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-173+CRTT, Ring Type SelectionThis command plays one cycle of a r

Audio3-174 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CRTT=4,0 //Ring type number 4, operation 0 (play)OK //When 4 is in the supporte

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-175+VTD, Tone DurationThis command handles the selection of tone

General Safetyxx G24-L AT Commands Reference Manual April 15, 2008Keep away from live circuitsOperating personnel must:• not remove equipment covers.

Audio3-176 G24-L AT Commands Reference Manual April 15, 2008+VTS, Command-Specific Tone DurationThis command transmits a string of DTMF tones when a

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-177AccessAccess Control CommandsWhen the module or SIM card is l

Access3-178 G24-L AT Commands Reference Manual April 15, 2008The SIM card is unlocked only once the provided pin is verified as the SIM PIN. If the r

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-179The following table shows the +CPIN parameters.Command Type S

Access3-180 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CPIN=?OKAT+CLCK="SC",1,"<correct PIN>"//Not case-sen

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-181+EPIN, Enter SIM PIN2 to Verify PIN2 IndicatorThis AT command

Access3-182 G24-L AT Commands Reference Manual April 15, 2008+TPIN, Query Number of Remaining SIM PIN/PUK Entering AttemptsThis command returns the n

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-183+CPWD, Change PasswordThis command sets a new password for th

Access3-184 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CPWD =? +CPWD: ("SC",8),("AO",4),("OI",4),("

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-185The following table shows the +CLCK parameters.Command Type S

Preface April 15, 2008 G24-L AT Commands Reference Manual xxiDangerous procedure warningsWarnings, such as the example below, precede potentially dan

Access3-186 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CLCK=?+CLCK: ("SC","AO","OI","OX",&quo

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-187OK(Voice and data international calls barred, fax and SMS not

Access3-188 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +EMPC parameters.Command Type Syntax Response/Action Remar

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-189ExampleAT+EMPC?+EMPC:3,0OKThe status of phone is: the subsidy

Modem Configuration and Profile3-190 G24-L AT Commands Reference Manual April 15, 2008Modem Configuration and Profile Modem Register CommandsThe G24-

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-191The following table shows the V parameters.ExampleATV?V: 1OKA

Modem Configuration and Profile3-192 G24-L AT Commands Reference Manual April 15, 2008The following table shows the Qn parameters.ExampleATQ0OKATQ?Q:

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-193ExampleATE?001OKX, Result Code Selection and Call Progress Mo

Modem Configuration and Profile3-194 G24-L AT Commands Reference Manual April 15, 2008S, Bit Map RegistersThis command reads/writes values of the S-r

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-195The following table shows the different S-registers and their

Limitation of Liabilityxxii G24-L AT Commands Reference Manual April 15, 2008CMM ComplianceThe disclosure table and symbols below are provided in acc

Modem Configuration and Profile3-196 G24-L AT Commands Reference Manual April 15, 2008ExampleATS36?005OKATS0=3OKATS0?003OKS2This command handles the

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-197S12This command handles the selection of the guard time, whic

Modem Configuration and Profile3-198 G24-L AT Commands Reference Manual April 15, 2008?, Return the Value of the Last Updated S-registerThis command

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-199ExampleAT&F?&F: 0OKZ, Reset to Default ConfigurationT

Modem Configuration and Profile3-200 G24-L AT Commands Reference Manual April 15, 2008enables the G24-L sleep mode and signals its readiness for slee

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-201Figure 3-9: Wakeup-In LineTwo modes exist:• Idle Mode: The te

Modem Configuration and Profile3-202 G24-L AT Commands Reference Manual April 15, 2008Two modes exist:• Idle mode: The G24-L has no data to send.• Wa

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-203The following table shows the S24 parameters.ExampleATS24? &l

Modem Configuration and Profile3-204 G24-L AT Commands Reference Manual April 15, 2008The following table shows the S102 parameters.ExampleATS102? &l

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-205Exampleats100?001OKats100=0OKats100?000OK+MSCTS, Enable/Disab

Preface April 15, 2008 G24-L AT Commands Reference Manual xxiiiMOTOROLA has been informed of such potential loss or damage. And in no event shall MOT

Modem Configuration and Profile3-206 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +MSCTS parameters.ExampleAT+MSCTS

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-207The following table shows the +CMEE parameters. Command Ty

Modem Configuration and Profile3-208 G24-L AT Commands Reference Manual April 15, 2008 Table 3-140: +CME Errors<Parameter> Description<err&

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-209Note: +CME ERROR:280, Data lost, is sent to the terminal in

Modem Configuration and Profile3-210 G24-L AT Commands Reference Manual April 15, 2008 Table 3-141: +CMS Errors<Parameter> Description<err&

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-211ExampleAT+CMEE=0 //+CME ERROR is not usedOKAT+VTDERRORAT+CME

Modem Configuration and Profile3-212 G24-L AT Commands Reference Manual April 15, 2008AT+VTD+CME ERROR: operation not supported

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-213+CEER, Extended Error ReportThis execution command returns an

Modem Configuration and Profile3-214 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CEER parameters.Table 3-143: +CE

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-215ExampleAt+CEER+CEER: "No information available"OK A

Claimingxxiv G24-L AT Commands Reference Manual April 15, 2008customer service department of your service provider or Motorola's call Center at

UI (User Interface)3-216 G24-L AT Commands Reference Manual April 15, 2008UI (User Interface)+CRSM, Restricted SIM AccessThis command provides limite

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-217The following table shows the +CRSM parameters.Table 3-144: +

UI (User Interface)3-218 G24-L AT Commands Reference Manual April 15, 2008<P1>,<P2>,<P3>Integer type. Parameters passed on by the M

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-219<sw1> <sw2> Integer character format. Information

UI (User Interface)3-220 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CRSM=176,28478,0,0,20 //READ BINARY, GID1(6F3E),0 ,0 , 20 bytes+C

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-221+CRSM: 152,4 //Error: access condition not fulfilledOKAT+CRSM

UI (User Interface)3-222 G24-L AT Commands Reference Manual April 15, 2008Exampleat&vACTIVE PROFILE:E1 Q0 V1 X4 &C1 &D2 &K3 &Y0S0

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-223ExampleAT&W0OKAT&W1OKAT&C Set circuit 109 (DCD) b

UI (User Interface)3-224 G24-L AT Commands Reference Manual April 15, 2008&Y, Default User ProfileThe following table shows the &Y parameters

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-225+CMER, Mobile Equipment Event ReportingThe following table sh

Preface April 15, 2008 G24-L AT Commands Reference Manual xxvWhat is Not Covered by the WarrantyThis warranty is not valid if the defects are due to

UI (User Interface)3-226 G24-L AT Commands Reference Manual April 15, 2008The <code> parameter is a two-letter abbreviation of the language. Th

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-227AT+CLAN="DE"OKAT+CLAN?+CLAN: "DE"OK+CIND,

UI (User Interface)3-228 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CIND=?+CIND: ("service",(0,1)),("call",(0,1))

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-229Unsolicited UI Status MessagesCertain actions performed in th

GPRS3-230 G24-L AT Commands Reference Manual April 15, 2008GPRSGPRS FunctionalityGSM 07.07 defines commands that a TE may use to control a GPRS ME vi

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-231+CGCLASS, GPRS Mobile Station ClassThis command is used to se

GPRS3-232 G24-L AT Commands Reference Manual April 15, 2008+CGDCONT, Define PDP ContextThis command specifies the PDP (Packet Data Protocol) context.

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-233The following table shows the +CGDCONT parameters.Note: The I

GPRS3-234 G24-L AT Commands Reference Manual April 15, 2008+CGDCONT: 3,"IP","","0.0.0.0",0,0OKAT+CGDCONT= 1,"IP&qu

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-235The following table shows the +CGQMIN parameters.ReadAT+CGQMI

Trademarks MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the propert

Revision Historyxxvi G24-L AT Commands Reference Manual April 15, 2008Revision HistoryManual Number6802983C95-CManual TitleG24-L Developer’s Guide: G

GPRS3-236 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CGQMIN=?+CGQMIN: ("IP"),(0-3),(0-4),(0-5),(0-9),(0-18,31)OKAT+CGQMIN?

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-237The following table shows the +CGQREQ parameters.ExampleAT+CG

GPRS3-238 G24-L AT Commands Reference Manual April 15, 2008Note: This command has the characteristics of both the V.25ter action and parameter comman

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-239The test command returns a list of defined <cid>s.The f

GPRS3-240 G24-L AT Commands Reference Manual April 15, 2008+MGEER, GPRS Extended Error ReportThis command is used to return the PDP context activatio

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-241The following table shows the +MGEER parameters.Table 3-158:

GPRS3-242 G24-L AT Commands Reference Manual April 15, 2008D*99, Request GPRS Service "D"This command enables the ME to perform the actions

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-243The following table shows the D*99 parameters.ExampleATD*99 /

GPRS3-244 G24-L AT Commands Reference Manual April 15, 2008+CGPRS, GPRS CoverageThis command indicates whether there is GPRS coverage.Note: GPRS cove

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-245+CGACT, PDP Context Activate or DeactivateThis command activa

April 15, 2008 G24-L AT Commands Reference Manual 1-1Chapter 1: Product FeaturesConnectivity InterfaceThe user can establish two types of connections

GPRS3-246 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CGACT=?+CGACT: (0,1)OKAT+CGACT?+CGACT: 1,0+CGACT: 2,0+CGACT: 3,0OKAT+CGACT=1ERRO

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-247• In the first step, the customer application informs the G24

GPRS3-248 G24-L AT Commands Reference Manual April 15, 2008Profile download is performed automatically during device initialization, with no user int

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-249b5 9EXX' response code for SIM data download errorb6 Tim

GPRS3-250 G24-L AT Commands Reference Manual April 15, 2008Table 3-167: Profile Structure – Byte 4 (Proactive SIM)Bit Descriptionb1 Proactive SIM: SE

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-251b5 RFU, bit = 0b6b7b8Table 3-170: Profile Structure – Byte 7

GPRS3-252 G24-L AT Commands Reference Manual April 15, 2008Table 3-172: Profile Structure – Byte 9 (Proactive SIM) Bit Descriptionb1 Sustained DISPLA

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-253Table 3-174: Profile Structure – Byte 11 (Soft keys informati

GPRS3-254 G24-L AT Commands Reference Manual April 15, 2008Table 3-176: Profile Structure – Byte 13 (Bearer independent protocol supported bearers –

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-255Table 3-178: Profile Structure – Byte 15 (Screen width)Bit De

CSD Operation1-2 G24-L AT Commands Reference Manual April 15, 20082. Upon being interrupted by the RI signal, drop the DTR line to switch to command

GPRS3-256 G24-L AT Commands Reference Manual April 15, 2008Note: The bits comprising each subsequent byte are all: RFU, bit = 0.b3 RFU, bit = 0b4b5b6

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-257+MTKE, Motorola ToolKit EnableThis command enables/disables t

GPRS3-258 G24-L AT Commands Reference Manual April 15, 2008+MTKP, Motorola ToolKit Proactive (Unsolicited Indication)In order to allow the customer t

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-259The following table shows the +MTKP parameters.Table 3-185: +

GPRS3-260 G24-L AT Commands Reference Manual April 15, 2008Values when ProactiveCmdType=9 (Send SMS)<Text> Text information in ASCII format.Val

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-261Command Type Syntax Response/Action RemarksSetAT+MTKP=<Cmd

GPRS3-262 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +MTKP Set parameters.Note: If the SIM asks for yes/no answer

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-263Send DTMFThis proactive SIM service command requests the G24-

GPRS3-264 G24-L AT Commands Reference Manual April 15, 2008The diagram below demonstrates the communication between the SIM, the G24-L and the TE reg

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-265The following table shows the +MTKP parameters for response c

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-3Improved OEM FeaturesG24-L contains the following new and improved f

GPRS3-266 G24-L AT Commands Reference Manual April 15, 2008The following table describes the events types.Table 3-188: Current Event Types Event Note

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-267The following table shows the Set Event List parameters.Note:

GPRS3-268 G24-L AT Commands Reference Manual April 15, 2008Language CodesThe following table lists an example of the codes for each language supporte

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-269fj Fijifo Faroesefr Frenchfy Frisianga Irishgd Scotsgl Galici

GPRS3-270 G24-L AT Commands Reference Manual April 15, 2008la Latinln Lingalalo Laothianlt Lithuanianlv Latvian,mg Malagasymi Maorimk Macedonianml Ma

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-271sd Sindhisg Sanghosh Serbo-Croatiansi Sinhalesesk Slovaksl Sl

GPRS3-272 G24-L AT Commands Reference Manual April 15, 2008+MTKM, Motorola ToolKit MenuThe following table shows the +MTKM parameters.vi Vietnamesevo

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-273+MTKM, Motorola ToolKit Menu (Response)The following table sh

GPRS3-274 G24-L AT Commands Reference Manual April 15, 2008AT+MTKM=1,1 //Select Item 1.OK+MTKP: 3,1,0,3,8,0,Enter Country name://User is requested to

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-275The following table shows the +MTKA parameters.Notes:For <

Improved OEM Features1-4 G24-L AT Commands Reference Manual April 15, 2008Set up Idle Mode TextThe proactive SIM mechanism enables the SIM to initiat

GPRS3-276 G24-L AT Commands Reference Manual April 15, 2008+MTKP: 1,0,"! YOUR RECHARGE OF TSH: 250.00 TO 0756706666 IS SUCCESSFUL"AT+MTKA

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-277The following table shows the +MIPCALL parameters.ExampleAT+M

GPRS3-278 G24-L AT Commands Reference Manual April 15, 2008Example+MIPOPEN: 1 2 3 4 //All sockets closed+MIPOPEN: 1 3 4 //Socket 2 openedThe followi

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-279ExampleAT+MIPOPEN=1,1200,"123.245.213.012",1234,0//

GPRS3-280 G24-L AT Commands Reference Manual April 15, 2008The +MIPODM command returns a +MIPSTAT <Socket ID><Error> unsolicited event if

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-281The following table shows the +MIPODM parameters.Note: Motoro

GPRS3-282 G24-L AT Commands Reference Manual April 15, 2008+MIPCLOSE, Close a SocketThis command causes the G24-L to free the socket accumulating buf

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-283+MIPSETS, Set Size for Automatic PushThis command causes the

GPRS3-284 G24-L AT Commands Reference Manual April 15, 2008+MIPSETS: (1-4),(1-1372)OKAT+MIPSETS?+MIPSETS: 1,100 //Information provided only for activ

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-285Example(Socket 4 was not opened using +MIPOPEN AT command) AT

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-5TCP/UDP IP ConnectionOverviewThe network capabilities are achieved b

GPRS3-286 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +MIPPUSH parameters.ExampleAT+MIPPUSH=1 //Terminal asks the

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-287ExampleAT+MIPFLUSH=2 //Socket number 2 was previously opened

GPRS3-288 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +MIPRTCP parameters.Example+MIPRTCP: 3,0,7171+MIPSTAT, Statu

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-289Event+MIPXOFF: <Socket ID>Example+MIPXOFF: //The G24-L

GPRS3-290 G24-L AT Commands Reference Manual April 15, 2008parameters before socket activation or when the socket is in active state. Configuration v

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-291ExampleAT+MIPCONF=2,5,10,600,75,2OKAT+MIPOPEN=2,0,"66.24

GPRS3-292 G24-L AT Commands Reference Manual April 15, 2008+MIPRTCP: 2,130,484541443E3C5449544C453E333032204D6F7665643C2F5449544C453E3C2F484541443E3C

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-293The following table shows the +MPING command parameters.Read+

GPRS3-294 G24-L AT Commands Reference Manual April 15, 2008<TTL> Time To Live (TTL). Specifies number of hops (hop is one step, from one router

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-295The following table shows the +MPING unsolicited response par

Improved OEM Features1-6 G24-L AT Commands Reference Manual April 15, 20082. The G24-L opens a TCP/IP stack as one of its "sockets" (it mus

GPRS3-296 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+MIPCALL=1,"internet"OK+MIPCALL: 10.170.4.111AT+MPING=1,"10.170.4.

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-297The following table shows the +MPINGSTAT unsolicited response

GPRS3-298 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+MIPCALL=1,"internet"OK+MIPCALL: 10.170.4.111//Ping host www.motorola.c

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-299+MSDNS, Set DNS IP AddressThis command set/read DNS (Domain N

GPRS3-300 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+MSDNS=?+MSDNS: (1-5),(<IP>),(<IP>)OKAT+MSDNS?

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-301+MIPCFF, Control Filtering Feature for Incoming TCP Connectio

GPRS3-302 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +MIPCFF parameters.Command Type Syntax Response/Action Remar

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-303The following table shows the +MIPCFF filtering error codes a

NOP - Compatible3-304 G24-L AT Commands Reference Manual April 15, 2008NOP - CompatibleIGNORED (Compatible Only) CommandsThe following commands retur

April 15, 2008 G24-L AT Commands Reference Manual 4-1Chapter 4: Using the CommandsSetting Up the G24-L (Power On and Initial Actions)There are three p

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-73. Side A and B previously agree on a port number, and exchange thei

Setting Up the G24-L (Power On and Initial Actions)4-2 G24-L AT Commands Reference Manual April 15, 2008Figure 4-2: Detailed Phone State Transactions

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-3Recommended G24-L Initialization after PowerupFigure 4-3 provides

Recommended G24-L Initialization after Powerup4-4 G24-L AT Commands Reference Manual April 15, 2008RS232 Lines SetupThere is no dynamic detection. Up

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-5Test G24-L CommunicationThis is a preliminary step. During this st

Recommended G24-L Initialization after Powerup4-6 G24-L AT Commands Reference Manual April 15, 20081. Baud setting example:AT+CBAUD=6//Setting baud r

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-7SIM Card StatusTo enable the module to transfer from basic command

Recommended G24-L Initialization after Powerup4-8 G24-L AT Commands Reference Manual April 15, 2008G24-L Network ConnectionIn this step, the G24-L de

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-9Terminal SynchronizationIn this step, the terminal requests the st

SMS4-10 G24-L AT Commands Reference Manual April 15, 2008SMSManaging Stored Messages in the G24-L MemoryAT+CPMS="me" //Select NVM as prefe

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-11Setting the Notification Indication for Incoming Messages (Using

Improved OEM Features1-8 G24-L AT Commands Reference Manual April 15, 2008Technical DescriptionFigure 1-1, “System Overview,” on page 1-5 displays th

SMS4-12 G24-L AT Commands Reference Manual April 15, 2008Writing, Saving and Sending Messages (Using AT+CMGW and AT+CMSS)Writing messages into the da

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-13Sending Messages (Using AT+CMGS)Sends an SM from the G24-L to the

Call Control4-14 G24-L AT Commands Reference Manual April 15, 2008Call ControlThe following figure is a detailed view of the states the G24-L goes th

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-15atd035659260,345,22; //VOICE call with tones sent after connecti

Call Control4-16 G24-L AT Commands Reference Manual April 15, 2008Dialing the Last Number Exampleatd035658278;OKOKathNO CARRIEROKatdl //Last called

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-17Conference Callatd051632601; //Dialing the first member of the c

Data Call4-18 G24-L AT Commands Reference Manual April 15, 2008Data CallSwitching Modes (Data Mode/Command Mode)atd054565190 //Calling the remote mo

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-19GPRSWhen using the GPRS, it is recommended to implement a "k

GPRS4-20 G24-L AT Commands Reference Manual April 15, 2008Using the ATD* Command SetRequest GPRS service 'D':ATD*99***(CID)#The CID (Contex

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-21Changing the Character SetExampleWhen an SMS messages with the fo

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-9sound then gets picked up again by the microphone and is again route

Sleep Mode4-22 G24-L AT Commands Reference Manual April 15, 2008Sleep ModeNote: The notation of TXD and RXD are from the perspective of the terminal

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-23STKDisplay Text/Display Idle Mode TextThe SIM card requests to se

STK4-24 G24-L AT Commands Reference Manual April 15, 2008Get InputThe SIM card requests to display text on the terminal, and waits for a response fro

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-25Set Up MenuThe terminal requests the STK menu. As a result, the S

STK4-26 G24-L AT Commands Reference Manual April 15, 2008Set Up CallThe SIM initiates a call, and its data is displayed on the terminal.Figure 4-19:

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-27+MTKM: 2,2,"IN THE COUNTRY",0AT+MTKM=1,1 //Select Item

STK4-28 G24-L AT Commands Reference Manual April 15, 2008Setup Event ListThe terminal updates the G24-L on any of the events. The G24-L passes events

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-29TCP/IPTCP Data Transfer ExampleAT+MIPCALL=1,"orange",&q

TCP/IP4-30 G24-L AT Commands Reference Manual April 15, 2008+MIPSETS=1,200 //Asking the G24-L to accumulate 200 bytes on socket 1 prior to sending+MI

Chapter 4: Using the Commands April 15, 2008 G24-L AT Commands Reference Manual 4-31+MIPXON: 1 //G24-L pushed the data into the protocol stack and is

Improved OEM Features1-10 G24-L AT Commands Reference Manual April 15, 2008The algorithm provides full control over activation/deactivation of audio

Audio4-32 G24-L AT Commands Reference Manual April 15, 2008AudioScenarios for Setting Up Handset Mode or Handsfree ModeHandset ModeAT+MAPATH=1,1 //S

April 15, 2008 G24-L AT Commands Reference Manual 5-1Chapter 5: ToolsTools OverviewThis chapter describes the G24-L Drivers and application flashing t

Tools Overview5-2 G24-L AT Commands Reference Manual April 15, 2008

April 15, 2008 G24-L AT Commands Reference Manual A-1Appendix A: Reference TablesThis appendix contains the following sections:• AT Commands Alphabeti

AT Commands Alphabetical SummaryA-2 G24-L AT Commands Reference Manual April 15, 2008&GThis command is supported for backward compatibility only,

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-3\GThis command sets the use of the software control.Page 3-197\JThis

AT Commands Alphabetical SummaryA-4 G24-L AT Commands Reference Manual April 15, 2008+CCLKThis command reads/sets the G24's current date and tim

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-5+CGPRSThis command indicates whether there is GPRS coverage.Page 3-2

AT Commands Alphabetical SummaryA-6 G24-L AT Commands Reference Manual April 15, 2008+CLCCThis command returns a list of all current G24-L calls and

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-7+CMUTThis command mutes/unmutes the currently active microphone path

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-11Short Message Service (SMS)OverviewThe SMS feature provides means f

AT Commands Alphabetical SummaryA-8 G24-L AT Commands Reference Manual April 15, 2008+CPBSThis command selects the memory that is to be used for read

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-9+CRSMThis command provides limited access to the Elementary Files on

AT Commands Alphabetical SummaryA-10 G24-L AT Commands Reference Manual April 15, 2008+EMPCThis command unlocks or resets the first PLMN of the inser

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-11+MAVOLThis command enables you to determine a volume setting for a

AT Commands Alphabetical SummaryA-12 G24-L AT Commands Reference Manual April 15, 2008+MIPCALL This command creates a wireless PPP connection with th

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-13+MIPSTATThis unsolicited event is sent to the terminal indicating a

AT Commands Alphabetical SummaryA-14 G24-L AT Commands Reference Manual April 15, 2008+MSCTSThis command defines the behavior of the CTS line when th

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-15+VTSThis command transmits DTMF tones when a voice call is active.P

AT Commands Alphabetical SummaryA-16 G24-L AT Commands Reference Manual April 15, 2008NThis command is supported for backward compatibility only, and

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-17Character Set Table CS1: (GSM -> UCS-2)The following table shows

Short Message Service (SMS)1-12 G24-L AT Commands Reference Manual April 15, 2008Technical DescriptionThe G24-L memory for incoming short messages is

Character Set Table CS1: (GSM -> UCS-2)A-18 G24-L AT Commands Reference Manual April 15, 20080x140x039B Ù0x150x03A9 Ð0x160x03A0 Ø0x170x03A8 Ó0x180

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-190x350x0035 60x360x0036 70x370x0037 80x380x0038 90x390x0039 :0x3A0x0

Character Set Table CS1: (GSM -> UCS-2)A-20 G24-L AT Commands Reference Manual April 15, 20080x560x0056 W0x570x0057 X0x580x0058 Y0x590x0059 Z0x5A0

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-21Character Set Table CS2: (ASCII <-> UTF-8)The following table

Character Set Table CS7: (ASCII table)A-22 G24-L AT Commands Reference Manual April 15, 2008Character Set Table CS7: (ASCII table)The following table

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-23023 027 017 00010111 ETB (End of Trans. Block)024 030 018 00011000

Character Set Table CS7: (ASCII table)A-24 G24-L AT Commands Reference Manual April 15, 2008051 063 033 00110011 3052 064 034 00110100 4053 065 035 0

Appendix A: Reference Tables April 15, 2008 G24-L AT Commands Reference Manual A-25085 125 055 01010101 U086 126 056 01010110 V087 127 057 01010111 W0

Character Set Table CS7: (ASCII table)A-26 G24-L AT Commands Reference Manual April 15, 2008117 165 075 01110101 u118 166 076 01110110 v119 167 077 0

April 15, 2008 G24-L AT Commands Reference Manual Acr & Abbr-1Acronyms and Abbreviations Abbreviation Full NameA ACCHAT Command Channel - Used for

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-13Character SetsThe following includes the references to various tabl

Acr & Abbr-2 G24-L AT Commands Reference Manual April 15, 2008C CTSRS232 pin used for HW flow control. The MGOM uses this pin to stop data transm

Acronyms and Abbreviations April 15, 2008 G24-L AT Commands Reference Manual Acr & Abbr-3H HCOHearing Carry Over allows Speech Disabled callers w

Acr & Abbr-4 G24-L AT Commands Reference Manual April 15, 2008I ICIntegrated CircuitI IDIdentificationI IDLCInformation DLC - refers to all the d

Acronyms and Abbreviations April 15, 2008 G24-L AT Commands Reference Manual Acr & Abbr-5Q QoSQuality of ServiceQRARecipient AddressQRIRing Indic

T TBDTo Be DefinedTTDMATime Division Multiple AccessTTETerminal EquipmentTTLSTransport Layer Security protocol for establishing a secure connection be

April 15, 2008 G24-L AT Commands Reference Manual Index-1IndexNumerics8859 Character Set Management, 1-14AAbbreviationsGeneral System, 2-2Aborting Co

Index A - A Index-2 G24-L AT Commands Reference Manual April 15, 2008+CPAS, Phone Activity Status, 3-39+CPBF, Find Phone Book Entries, 3-63+CPBR, Re

B - D IndexApril 15, 2008 G24-L AT Commands Reference Manual Index-3Sleep Mode, 3-202S94, Sidetone Effect, 3-161S96, Echo Canceling, 3-162Sleep Mode

Index E - M Index-4 G24-L AT Commands Reference Manual April 15, 2008Receive from TCP Protocol Stack, 3-287Receive from UDP Protocol Stack, 3-287Sen

N - S IndexApril 15, 2008 G24-L AT Commands Reference Manual Index-5Send from Storage, 3-101Write to Memory, 3-103Mobile EquipmentReport Error, 3-20

Character Sets1-14 G24-L AT Commands Reference Manual April 15, 2008Unlike some legacy encoding, UTF-8 is easy to parse. So-called lead and trail byt

Index T - W Index-6 G24-L AT Commands Reference Manual April 15, 2008Unblocking, 3-177Unlocking, 3-177Sleep ModeHW Signals, 3-200Set Delay, 3-202Sle

W - W IndexApril 15, 2008 G24-L AT Commands Reference Manual Index-7

@6802983C95@6802983C95-CMOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names ar

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-15AT Commands SummaryThe following list contains a summary of all the

AT Commands Summary1-16 G24-L AT Commands Reference Manual April 15, 2008DL This command places a voice call to the last number dialed. Page 3-14H Th

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-17+CLCC This command displays a list of all current G24-L calls and t

AT Commands Summary1-18 G24-L AT Commands Reference Manual April 15, 2008System Date and Time Access Commands+CCLK This command reads/sets the G24-L&

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-19+CGSMS This command handles the selection of the service or service

April 15, 2008 G24-L AT Commands Reference Manual iManual Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AT Commands Summary1-20 G24-L AT Commands Reference Manual April 15, 2008&D This command determines how the G24-L responds when the DTR (Data Ter

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-21+MAMUT This command controls the muting/unmuting of all input paths

AT Commands Summary1-22 G24-L AT Commands Reference Manual April 15, 2008E This command defines whether the G24-L echoes the characters received from

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-23&Y This command displays the default user profile.Page 3-224+CM

AT Commands Summary1-24 G24-L AT Commands Reference Manual April 15, 2008TCP/IP Commands+MIPCALL This command creates a wireless PPP connection with

Chapter 1: Product Features April 15, 2008 G24-L AT Commands Reference Manual 1-25&G This command is supported for backward compatibility only, a

AT Commands Summary1-26 G24-L AT Commands Reference Manual April 15, 2008

April 15, 2008 G24-L AT Commands Reference Manual 2-1Chapter 2: Introduction to AT CommandsAT Commands OverviewAT commands are sets of commands used f

AT Commands Protocol2-2 G24-L AT Commands Reference Manual April 15, 2008General System AbbreviationsThe basic system configuration contains a modem

Chapter 2: Introduction to AT Commands April 15, 2008 G24-L AT Commands Reference Manual 2-3AT Commands StructureCommand StructureAn AT command line

Table of Contentsii G24-L AT Commands Reference Manual April 15, 2008TCP/UDP IP Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AT Commands Structure2-4 G24-L AT Commands Reference Manual April 15, 2008Results Code StructureWhen a command is issued, the G24-L responds with a m

Chapter 2: Introduction to AT Commands April 15, 2008 G24-L AT Commands Reference Manual 2-5AT Commands Protocol & Structure ConfigurationThe AT

Command Token Types2-6 G24-L AT Commands Reference Manual April 15, 2008Command Token TypesBasic Syntax Command FormatThe format of Basic Syntax comm

Chapter 2: Introduction to AT Commands April 15, 2008 G24-L AT Commands Reference Manual 2-7Command Argument Types<value> consists of either a

Values2-8 G24-L AT Commands Reference Manual April 15, 2008Values Range of ValuesWhen the action accepts a single numeric sub-parameter, or the param

April 15, 2008 G24-L AT Commands Reference Manual 3-1Chapter 3: AT Commands ReferenceModem IDSubscriber Unit IdentityThese commands allow the user to

Modem ID3-2 G24-L AT Commands Reference Manual April 15, 2008+CGMM, +GMM, +FMM, Request Model ID These commands request the model identification. The

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-3+CGMR, +GMR, +FMR, Request Revision These commands request the

Modem ID3-4 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CGSN?+CGSN: "004400013805666" OKAT+GSN+GSN: "004400013805666&qu

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-5+CSCS: ("8859-1","ASCII","GSM",&q

Table of ContentsApril 15, 2008 G24-L AT Commands Reference Manual iiiSubscriber Unit Identity . . . . . . . . . . . . . . . . . . . . . . . . . . .

Modem ID3-6 G24-L AT Commands Reference Manual April 15, 2008OK I, Request Identification Information This command displays various G24-L information

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-7Read CommandThe following table shows the +CNUM parameters.Exam

Modem ID3-8 G24-L AT Commands Reference Manual April 15, 2008+CLAC, List of All Available AT CommandsExampleAT+CLAC$%C&C&D::::\A\SOKCapabilit

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-9Call ControlManaging a CSD (Data) Call The G24-L working modes

Call Control3-10 G24-L AT Commands Reference Manual April 15, 2008Switching From Data Mode to Command Mode To switch the connection from Data mode to

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-11Call Control AT CommandsD, Dial Command This command places a

Call Control3-12 G24-L AT Commands Reference Manual April 15, 2008The following table shows the D parameters.Note: ATDP, ATDT, AT*D, <T>, <P

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-13The following table shows a detailed description for the D>

Call Control3-14 G24-L AT Commands Reference Manual April 15, 2008atd>1; //Speed dial from phonebookOKOKathNO CARRIEROKatd>1 //Speed dial from

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-15Note: When ATDL is issued after a dialed number with comma dig

Table of Contentsiv G24-L AT Commands Reference Manual April 15, 2008Supplementary Services . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Call Control3-16 G24-L AT Commands Reference Manual April 15, 2008ExampleRING //Incoming callRING //Incoming callath //Hang-up incoming call NO CARRI

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-17A, Answer Incoming Call This command answers an incoming VOICE

Call Control3-18 G24-L AT Commands Reference Manual April 15, 2008RING/+CRING Indication+CRING: <type>or:RINGThe following table shows the +CRC

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-19RINGAT+CRC=1 //Enable extended ring formatOK+CRING: REL ASYNC+

Call Control3-20 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CLIP parameters.ExampleAT+CLIP=?+CLIP: (0,1) //CLI p

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-21+CCWA, Call Waiting CommandThis command controls the Call Wait

Call Control3-22 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CCWA parameters.Note: When the parameter <mode>

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-23OKExamples of +CCWA set command - network interrogation AT+CCW

Call Control3-24 G24-L AT Commands Reference Manual April 15, 2008Note: Only voice calls can be put on HOLD.A precondition for the multi-party servic

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-25The following table shows the +CHLD actions according to state

Table of ContentsApril 15, 2008 G24-L AT Commands Reference Manual vHardware Information Commands . . . . . . . . . . . . . . . . . . . . . . . . .

Call Control3-26 G24-L AT Commands Reference Manual April 15, 2008ExampleAT+CHLD=?+CHLD: (0,1,1x,2,2x,3)OKAT+CCWA=1 //Enable call waiting OKatd931123

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-27OK+CCWA: "055728386",129,1,"",0 //Waiting

Call Control3-28 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CCFC parameters.Note: A forward-to phone <number&

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-29ExampleAT+CCFC=?+CCFC: (0-5)OKAT+CCFC=0,3,"01256316830&qu

Call Control3-30 G24-L AT Commands Reference Manual April 15, 2008Note: When a service is in state A, and the terminal wants to enable the CLI presen

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-31RING+CLIP: "",128,,128,"",1)athNO CARRIERO

Call Control3-32 G24-L AT Commands Reference Manual April 15, 2008The following table shows the +CBST parameters.ExampleAT+CBST=?+CBST: (000,004,006,

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-33O, Return to Online Data State This command returns the G24-L

Call Control3-34 G24-L AT Commands Reference Manual April 15, 2008+CHUP, Hang Up CallThis command causes the G24-L to hang up the current GSM call.+C

Chapter 3: AT Commands Reference April 15, 2008 G24-L AT Commands Reference Manual 3-35The following table shows the AT+CSNS parameters.Note: Any mob